BNCHG - EPK 11C KIT PART A (RESIN)

  • MSDS: BNCHG
  • Manufacturer: HYSOL DIV THE DEXTER CORP
  • Product Name: EPK 11C KIT PART A (RESIN)
  • National Stock Number: 8040-01-004-1031
Product Identification

Product ID:EPK 11C KIT PART A (RESIN)
MSDS Date:10/25/1984
FSC:8040
NIIN:01-004-1031
Kit Part:Y
MSDS Number: BNCHG

Responsible Party
HYSOL DIVISION, THE DEXTER CORPORATION
211 FRANKLIN ST.
OLEAN, NY 14760
US

Emergency Phone: 716-372-6300

Info Phone: 716-372-6300

Preparer: JAMES P HORNBURG

Cage: 14347

Contractor
HYSOL DIVISION, THE DEXTER CORPORATION
312 OLEAN, NY 14760-1297 US

Telephone: 716-372-6300/6309

Cage: 14347

Ingredients

CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: 1%

OSHA PEL NOT ESTABLISHED *


TALC

CAS: 14807-96-6

RTECS: WW2710000

Fraction By Weight: 45%

OSHA PEL NOT ESTABLISHED *


* FILLER PARTICLES ARE THOROUGHLY WETTED BY EPOXY RESIN SO

RTECS: 9999999ZZ


** SUBSEQUENTLY GROUND, MACHINED, OR SANDED.

RTECS: 9999999ZZ

Hazards

Health Hazards Acute and Chronic:MAY BE MILDLY IRRITATING TO THE SKIN.

First Aid

First Aid:WASH WITH SOAP AND WATER AT FIRST OPPORTUNITY.

Fire Fighting

Flash Point Method:COC
Flash Point:470F,243C
Extinguishing Media:CO2, FOAM, OR DRY CHEMICAL
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:SCRAPE UP, TRANSFER TO METAL CONTAINERS.
SOLVENT MAY BE NECESSARY TO CLEAN UP STICKY RESIDUE, BUT OBSERVE
FIRE HAZARD OF SOLVENT.

Handling

Handling and Storage Precautions:STORE AWAY FROM DIRECT HEAT, WHICH
MIGHT CAUSE PHYSICAL SEPARATION OF THE FILLER.

Exposure Controls

Respiratory Protection:NOT REQUIRED.
Ventilation:LOCAL EXHAUST: ONLY IF HEATED.
Protective Gloves:RUBBER OR PLASTIC.
Supplemental Safety and Health

Chemical Properties

Vapor Pres:NIL
Spec Gravity:1.5 (WATER=1)
Evaporation Rate & Reference:>1 (BU AC=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:BLACK, HIGH VISCOSITY LIQUID, VERY SLIGHT ODOR.
Percent Volatiles by Volume:0

Stability

Stability Indicator/Materials to Avoid:YES

Disposal

Waste Disposal Methods:NEW YORK STATE DOES NOT PERMIT LANDFILL BURIAL
OF LIQUIDS. SOLIDIFY BY MIXING WITH A PORTION OF PART B (HARDENER).
THIS IS NOT A HAZARDOUS MATERIAL UNDER THE RESOURCE CONSERVATION
AND RECOVERY ACT (RC RA).

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.